Smart Home Face Recognition DoorPhone Model E16 Series

Smart Home Face Recognition DoorPhone Model E16 Series

Face recognition, mobile access, temperature measurement, and mask detection in one device.

E16 is a budget-friendly face recognition door phone, which offers excellent intercom communication and flexible access control methods like AI-powered face recognition and mobile app. It is typically used in commercial and residential COVID-19 applications.

Smart Home Face Recognition DoorPhone Model E16 Series

covid 19 temperature check template

Multi Scaning NFC Qrcoder Pin Face Recognition DoorPhone

Face Recognition access control DoorPhone Model E16 Series

Specification

  • At a Glance

    Visible light facial recognition;
    Better hygiene with touchless biometric authentication, fever and mask detection;
    Anti-spoofing algorithm against photo and video attack;
    20,000 face capacity & 20,000 card capacity;
    Face recognition duration less than 0.2s/user, face recognition accuracy rate greater than 99.7%;
    Allows both audio and video communication to an IP phone, mobile client, or softphone;
    Multiple verification methods including: face, PIN, cards and QR codes;
    Stand-alone operation;
    Configuration via web browser;
  • Anti-epidemic Function

    Mask Detection
    Body Temperature Detection [Only E16C(MD01) & E16C(MD02) support]
  • Physical & Power

    Housing Material: Plastic
    Display: 5 Inch IPS LCD, 1280x720
    Camera: 2M pixels, WDR
    Wiegand Port: Support
    RS485 Port: Support
    RF Card Reader: 13.56MHz, NFC
    Relay In / Out: 1 / 1
    Ethernet Port: RJ45, 10/100Mbps adaptive
    Bluetooth: Support
    802.3af Power-over-Ethernet
    12V DC Connector (if not using PoE)
    Tamper: Support
    Installation: Wall-mounted
    IP Level: IP65
    Working Humidity: 10~90%, no condensing
    Working Temperature: -20℃~+60℃
  • Identification

    Identification Mode: Face, PIN, NFC, RFID Card, BLE & QR code
    Identification Speed: <200ms
  • Capacity

    Face Capacity: 20,000
    Card Capacity: 20,000
    Event Log: 50,000
  • Forehead Temperature Measurement

    Only E16C(MD02) support
    Distance: 0.3M ~ 1M
    Accuracy: 0.1℃
    Deviation: ±0.3℃
    Range: 34℃ ~ 45℃
  • Wrist Temperature Measurement

    Only E16C(MD01) support
    Distance: 1cm ~ 5cm
    Accuracy: 0.1℃
    Deviation: ±0.3℃
    Range: 34℃ ~ 45℃

 
 
 
  • Face recognition, mobile access, temperature measurement, and mask detection in one device.

    E16 is a budget-friendly face recognition door phone, which offers excellent intercom communication and flexible access control methods like AI-powered face recognition and mobile app. It is typically used in commercial and residential COVID-19 applications.

    Smart Home Face Recognition DoorPhone Model E16 Series

    covid 19 temperature check template

    Multi Scaning NFC Qrcoder Pin Face Recognition DoorPhone

    Face Recognition access control DoorPhone Model E16 Series

    Specification

    • At a Glance

      Visible light facial recognition;
      Better hygiene with touchless biometric authentication, fever and mask detection;
      Anti-spoofing algorithm against photo and video attack;
      20,000 face capacity & 20,000 card capacity;
      Face recognition duration less than 0.2s/user, face recognition accuracy rate greater than 99.7%;
      Allows both audio and video communication to an IP phone, mobile client, or softphone;
      Multiple verification methods including: face, PIN, cards and QR codes;
      Stand-alone operation;
      Configuration via web browser;
    • Anti-epidemic Function

      Mask Detection
      Body Temperature Detection [Only E16C(MD01) & E16C(MD02) support]
    • Physical & Power

      Housing Material: Plastic
      Display: 5 Inch IPS LCD, 1280x720
      Camera: 2M pixels, WDR
      Wiegand Port: Support
      RS485 Port: Support
      RF Card Reader: 13.56MHz, NFC
      Relay In / Out: 1 / 1
      Ethernet Port: RJ45, 10/100Mbps adaptive
      Bluetooth: Support
      802.3af Power-over-Ethernet
      12V DC Connector (if not using PoE)
      Tamper: Support
      Installation: Wall-mounted
      IP Level: IP65
      Working Humidity: 10~90%, no condensing
      Working Temperature: -20℃~+60℃
    • Identification

      Identification Mode: Face, PIN, NFC, RFID Card, BLE & QR code
      Identification Speed: <200ms
    • Capacity

      Face Capacity: 20,000
      Card Capacity: 20,000
      Event Log: 50,000
    • Forehead Temperature Measurement

      Only E16C(MD02) support
      Distance: 0.3M ~ 1M
      Accuracy: 0.1℃
      Deviation: ±0.3℃
      Range: 34℃ ~ 45℃
    • Wrist Temperature Measurement

      Only E16C(MD01) support
      Distance: 1cm ~ 5cm
      Accuracy: 0.1℃
      Deviation: ±0.3℃
      Range: 34℃ ~ 45℃