FGT latest news

Classification

burkert solenoid valve

Interpret the meaning of German Burkert model letters

Understanding GermanyBurkertmodelLetters represent meanings,Because the Burkert brand is provided by the manufacturer in the excel backend table Burkert quotation system, many customers use solenoid valves, angle seat valves, flow meters and other products to indicate the meaning of the parameters indicated by the order numbers. Here our company has specially compiled some Burkert valve models. Interpretation of meaning makes it easier for customers to read more parameter information!

one.​

The portal in the table below is the Burkert product order number,

Generally, it is an order number with 6-8 Arabic numerals.

Generally in the lower left corner of the Burkert nameplate label, the four styles in front of the rear box indicate the Burkert product series, such as: Burkert 2000 type angle seat valve, Burkert 6014 type solenoid valve. The letter A at the back indicates the loop function. Two of them are usually closed, and C indicates three of them. Usually closed, if it is B, it means two of them are usually open, D means that three of them are usually open, and there are letters E, F, etc., the number 25,0 here means that the inner hole diameter of the valve is 25mm, the higher the value here Large indicates that the stronger the flow capacity of this valve, the greater the flow. The following EE, FF, and BB represent the sealing material, which is an abbreviation. The following RG and VA represent that the valve body is made of stainless steel, and also has materials such as PP, PVDF, and PVC. Wait for the valve body material, and choose the appropriate sealing material according to the Burkert valve medium. The GM86 and SA44 at the back indicate that the connection method is G thread and welding and the size. If it is a solenoid valve, there will be a voltage behind it indicating 230/50,024/DC,024 /50, etc., the number -08 after the voltage indicates that the power is 8W.

0012482000-A-2-25,0-EE-RG-GM86-BE *
0011372000-A-2-25,0-EE-VA-GM86-CE *
0013942000-A-2-25,0-EE-VA-SA44-CE *
1261496014-C02,0FFMSGM82-5-230/50-08 *
5010956213-00-A13,0BBMSGM84-6-024/DC-10 *

Understanding GermanyBurkertModel letters represent meanings

Burkert sealing material: NBR, FPM, EPDM PTFE, etc.

Sealing-Corresponding media:

NBR seal: neutral medium, such as compressed air, water, hydraulic oil

FPM seal: high solution, hot oil, oxygen

EPDM seal: oil-free and grease-free media such as hot water

Seal-medium temperature:

NBR seal: –10 to +80 °C

FPM seal: 0 to +120°C

EPDM seal: – 30 to +120 °C

Burkert valve body material: 
Burkert angle seat valve RG (gun metal body) VA (stainless steel body)  
Burkert solenoid valve MS VA PP(PP) PD(PVDF) PA (polyamide valve body)
Burkert pneumatic valve/diaphragm valve PC(PVC)

E represents the actuator size Dm: 80mm

F represents the actuator size Dm: 80mm

This is the EA representation of Burkert pneumatic valve sealing material: PTFE+EPDM (the double diaphragm I mentioned yesterday)

Burkert angle seat valve actuator material: PA, PPS available

Burkert angle seat valve selection information: flow to the bottom of the valve seat (the medium is water and liquid); flow to the valve seat (the medium is gas and vapor)

Understanding GermanyBurkertModel letters represent meanings

Burkert valve connection method letter designation

GM: Cylindrical internal thread connection

GM81: G1/8;

GM83: G3/8;DN13

GM84: G1/2;DN15/DN12

GM85: G3/4;DN20

GM86: G1;DN25

GM:87: G1 1/4;DN32

GM88: G1 1/2;DN40

GM89: G2;DN50

GM90: G2 1/2;DN65

NM: NPT threaded connection

NM85: NPT3/4 DN20

NM88: NPT 1 1/2 DN40

 RC: American threaded connection

SA: ISO 4200 welding joint

SD: DIN 11850 R2 welding port

FD: flange connection

TH, TC: clamp connection

Understanding GermanyBurkertModel letters represent meanings

Burkert product technical issues:

Burket type angle seat valve is a switch, and the switch valve must be equipped with a solenoid valve. , the solenoid valves equipped are their three-way small diameter 1.2 or 2.0mm)

Only Burkert control valve (usually 8802 series) is a combination, which is a control valve series + a controller series. For example:

2702+8693) needs to be equipped with a positioner/(someone calls it a controller). The positioner of the regulating valve has a solenoid valve inside, so no additional installation is required.

The repair kit for the Burkert2000 angle seat valve seat has two parts: the sealing kit for SET5 and the valve body angle accessories for SET6. If the customer wants a sealing ring for the seat valve seat, do they need to confirm with the customer which part it is? !

Burkert order numberParts starting with 951/931 can order 8-digit Arabic digit nitrogen generators93101251/1532.7 93101253/819 93101398/
 Note: Numbers starting with 931 are used in the core making industry, and the particles are double-acting. 
 (Nitrogen generator item number: 93101248/93101249/93101250/93101251/93101252/93101398) 
 The commonly sold spot 0000 inlet angle seat valve particles are single-acting 00001248/00001250, etc. 
Burkert2000 angle seat valveMany original product numbers can be produced. The replacement valve body now has a thinner wall than the original valve body and the valve body is 10-15mm shorter. 
 Distributors recommend ordering the original article number 
Detailed descriptionModel 001137 is discontinued and replaced with 178857. The original 001137 
 Model 001421/001400 original item numbers can still be produced! 
Angle seat valve product numbers that can be produced007225, 001133, 001137.001421.001400 

waypistonoperated angleseat valve

angleseat valve waypistonoperated

valve waypistonoperated angleseat

ürkert fluid control systems

Burkert diaphragm valve/a valve's diaphragm can be divided into single diaphragm and double diaphragm. When the customer wants to seal the diaphragm or call the gasket, ask clearly whether he wants single diaphragm EPDM (abbreviation AB) or double diaphragm EPDM. +PTFE (abbreviation EA)